Shenzhen Juke Industry Co., Ltd.
Tel: (86) 755-25566186
Fax: (86) 755-29668058
Address:2/F, Building 2, Hengchang Ronggaoxin Industrial Park, No. 128 Shangnan East Road, Hongtian, Bao'an District, Shenzhen, Guangdong, China
At the gas station, sometimes the tanker will experience slow or no oil delivery. The JUKI vacuumsolenoid valve is custom-made. There are many reasons for this, some of which are caused by the damage of the solenoid valve.
When the tanker doses fuel, the solenoid valve is fully open. When the remaining fuel volume reaches 0 or 3 liters to 0 or 5 liters, the computer sends a signal to shut off the large flow, and the small flow continues to refuel to the preset number. **Turn off the small flow Turn off the motor so that there is no overpayment.
When the tanker doses fuel, the solenoid valve is fully open. When the remaining fuel volume reaches 0 or 3 liters to 0 or 5 liters, the computer sends a signal to shut off the large flow, and the small flow continues to refuel to the preset number. **Turn off the small flow , JUKI vacuum solenoid valve factory, shut down the motor, so that there will be no overpayment of oil phenomenon.
When the above situation occurs in the double-bolt machine, one gun is normally refueled, and the other gun cannot be closed due to a broken solenoid valve. The oil can be discharged without being turned on, but the mainboard does not receive a start signal. , so can not count, there are some hidden dangers.
Therefore, the JUKI vacuum solenoid valve should be properly maintained when the solenoid valve cannot be opened to cause the dispenser to fail oil.
First of all, check the control circuit part of the solenoid valve, such as whether the zero line enters, whether the light valve plate is damaged or not. Secondly, check the solenoid valve itself for failures, such as whether the valve coil is open or if the diaphragm hole is blocked.
If the solenoid valve itself fails and cannot be repaired, replace the new solenoid valve. In addition, when purchasing the solenoid valve, it should be noted that the model must be consistent with the replacement.
Shenzhen Juke Industry Co., Ltd. is a company specializing in JUKI equipment and JUKI original Feida trading, subordinate Shenzhen Kechuangxin Mechanical and Electrical Equipment Co., Ltd. and Shenzhen Kechuanghong Mechanical and Electrical Equipment Co., Ltd., responsible for two sales at home and abroad. The market, as a leader in the JUKI placement machine industry, especially in the JUKI original feeder field, is the largest in the country, and has become a leader in the industry, not only in the professional/specificity of the same industry, but also in the Inventory and sales volume is the first in the country. The company holds more than 3,000 in-stock inventory all year round. The company sells JUKI original feeders to break through 9,000. In JUKI equipment, our company owns nearly 1000 square meters of warehouses, and there are nearly 30 JUKI placement machines in stock every year .Equipment for customers to choose, the company Bingzhe innovation and development, never satisfied, dedicated to the spirit of enterprise; all-weather customer service attitude, a group of highly skilled high-quality personnel, you have chosen me, do not worry!