juki750 Mounter

Product Name: juki750 Mounter

Place of Origin: JAPAN (Japan)

performance:

Theoretical speed: 0.25 seconds. 
Accuracy: 0.08MM. 
Angle accuracy: 0.001 degrees. 
PCB size: 330mm * 250mm. 
PCB thickness: 0.4MM ~ 4MM. 
Part mounting size: 1.0*0.5MM~32MM*11MM.QFP 20MM* 20MM. 
voltage: single phase 220V. 
power: 2KW. 
weight:. 1100KG 
KE-750- perfect placement speed: 0.25sec / chip- 
sheet accuracy: Within +/- 0.15mm- 
patch element range: 1005 ~ 23.5mmQFPs. 
mounted Racks: 80 stations. 

Operating system of juki750 mounter 
1. The appearance of various indicator lights, buttons, and operating handles is complete, operation and display are normal; 
2. The computer system is working properly; 
3. The input and output systems are working properly. 

Juki750 Mounter Specifications

juki750 Mounter Reflow oven 
1. The temperature control range meets the specifications of the specification, and the control accuracy is within ±2.0°C. 
2. The speed control meets the specifications of the manual, and the precision is controlled within ±0.2m/min; 
3. Substrate movement lateral temperature difference (≤150mm pitch) within ±10.0°C; 
4. The appearance of the heater is complete and the electrical connection is reliable. The hot air blower operates smoothly and without noise; 
5. The rails adjust freely and remain parallel. The effective width of the transmission substrate meets the specifications of the manual; 
6. The operating system is working properly, the instruments and meters are in good condition, the indications are accurate, and the readings are conspicuous, within the qualified use period;
7. The electrical equipment is complete, the pipelines are arranged in order, and the performance is sensitive and reliable 
. Regular maintenance inside and outside the equipment, no yellow robes, no grease. 

The mounting accuracy of the juki750 placement machine is 
the maximum offset between the center of the component and the centerline of the corresponding pad, and does not exceed 1/3 of the width of the component's foot (visual inspection); or the occurrence of anomalous offset is not more than 3 inches. 
The appearance of the instrument and instrument is in good condition. The indication is accurate. The readings are conspicuous. Within the qualified use period; the 
equipment is regularly maintained inside and outside, kept clean, free of oil, no rust, and arranged around with accessories, and the equipment is well lubricated.