juki multi-function mounter

Product Name:juki multi-function mounter

Whether

product parameters provide processing customization: Yes  Brand: JUKI/Heavy machine  Automatic Manual: Automatic  Patch Speed: 8000 (grain/hour)  Resolution: 0.03 (mm)  Number of feeders: 80  Power supply: 220 (V) Weight: 1100 (kg) 

maintenance of juki multi-function chip mounter 
(1) disassembly and cleaning of internal air circuit, solenoid valve, vacuum generating device, cylinder, etc. If the grease in the air path cannot be cleaned in time, the air path will be blocked. Caused by poor air path, resulting in high material throwing; under severe conditions, the oil accumulated in the gas path will corrode the internal seals and components of solenoid valves, vacuum generating devices, cylinders, etc., resulting in damage to the components and seriously affecting the machine. Normal use; 
(2) Clean and lubricate the moving parts of the machine. The machine is running for a long time. Due to improper environmental control, there will be a lot of dust sticking on the active part (such as: screw, guide rail, slider, transmission belt, motor coupling, etc.). If you can't get professional and timely maintenance and cleaning of the moving parts of the machine, the machine will run under overload conditions for a long time, which will inevitably affect the service life of the machine; 
(3) The machine has passed the warranty period, and it will not be able to run for a long time. The machine has been completely and professionally overhauled, and some parts of the machine already have hidden dangers. The hidden dangers cannot be resolved in time, and it is bound to pose a threat to the normal production of the machine. Therefore, it is necessary to perform major maintenance on the machine and timely check and discover the existence inside the machine. Hidden troubles and solutions, thereby reducing the frequency of machine failures and improving production efficiency; After a long period of operation of the machine, the relevant parts of the machine have wear, deformation, aging, small deviations in the running between the various parts, etc., the machine's most primitive parameters Already unable to adapt to the machine status, the placement accuracy of the machine has been affected. Therefore, the machine must be calibrated on a regular basis so that the machine can be produced with the highest precision and the product quality can be improved.
(4) Cleaning and disassembling the dirt and scale on the surface of Suzhou SMT machine and circuit board to avoid the internal heat dissipation of the machine due to dust and dirt, causing overheating and burning of the electrical parts. The maintenance of the machine can effectively reduce Feeding rate, reduce the number of alarms, improve machine production efficiency, and improve production quality.