Imported juki patcher

Product Name:Imported juki patcher

Product safety matters:

The main reason and countermeasures for the imported juki patcher are 
: 1) Nozzle problem, nozzle deformation, blockage, damage caused by lack of air pressure, leak, resulting in unacceptable suction material, improper reclaiming, and identification but no material. Countermeasures: Clean and replace the nozzle; 
Reason 2: identify system problems, poor vision, visual or laser lens is not clean, there are sundries to interfere with recognition, identification of improper light source selection and intensity, gray scale is not enough, and may identify the system is bad. Countermeasures: Clean and wipe the surface of the recognition system, keep it clean and free of dirt, etc., adjust the light source intensity, gray scale, and replace the identification system components; 
Cause 3: Position problem, reclaim material is not in the center of the material, and the reclaim height is not correct. Misalignment, retrieving material is not correct, there is a deviation, the identification data is inconsistent with the corresponding data parameters and discarded by the identification system as an invalid material. Countermeasures: Adjust the reclaiming position; 
Cause 4: Vacuum problems, insufficient air pressure, vacuum tracheal channels are not smooth, there are guides blocking the vacuum channels, or vacuum leaks cause insufficient air pressure and can not be picked up or picked up Drop on the way. Countermeasures: Adjust the pressure gradient to the required pressure value of the equipment, clean the air pressure pipeline, and repair the air leakage path.