smt Used Mounter

Product Name:smt Used Mounter

product description:

Smt material loss 
1, the nozzle deformation, plugging, damage, lack of vacuum pressure, leakage, resulting in the material can not afford, reclaimer is not correct, identification pass but no material. Solution: Ask the technician to check the equipment every day, test the NOZZLE center, clean the nozzle, and regularly maintain the equipment as planned. 
2, the spring tension is not enough, the suction nozzle and HOLD do not coordinate the up and down due to poor feeding; Solution: According to the plan regularly maintenance equipment, check and replace the wearing parts. 
3, HOLD / SHAFT or PISTON deformation, suction nozzle bending, suction nozzle shortened to cause poor material; Solution: According to the plan regularly maintenance equipment, check and replace the wearing parts. 
4, the material is not in the center of the material, the height of the material is not correct (usually after the parts meet the pressure of 0.05MM) and cause deviation, the material is not correct, there is offset, when the identification with the corresponding data parameters do not match The identified system is discarded as an invalid material; the solution is to regularly maintain the equipment as planned, check and replace the consumable parts, and correct the origin of the machine. 
5, vacuum valve, vacuum filter dirty, foreign matter blocking the vacuum trachea channel is not smooth, the instantaneous vacuum when the suction is not enough equipment operation speed caused by poor material; Solution: The technician must be cleaned daily nozzle, according to plan regularly maintenance equipment. 
6, the machine is not positioned horizontal vibration, the machine and FEEDER resonance caused poor material; solution: regular maintenance of equipment according to the plan, check the horizontal fixing support nut. 
7, screw rod, bearing loose wear caused by vibration during operation, stroke change and poor material; Solution: It is forbidden to blow the inside of the machine with the air gun to prevent dust, debris, and components from adhering to the screw. Regularly maintain the equipment as planned, check and replace the wearing parts. 
8, motor bearing wear, reader and amplifier aging causes the machine to change the origin, inaccurate operating data and poor material; Solution: According to the plan regularly maintenance equipment, check and replace the wearing parts, correct machine origin. 

Smt characteristics of second-hand placement machine smt
High packing density, small size and light weight of electronic products. The volume and weight of patch components are only about 1/10 that of conventional insertion components. After SMT is generally used, the volume of electronic products is reduced by 40% to 60%, and the weight is reduced by 60%. 80%. 
High reliability and strong earthquake resistance. The solder joint defect rate is low. 
High frequency characteristics. Reduced electromagnetic and radio frequency interference. 
Easy to automate and increase productivity. Reduce costs by 30% to 50%. Save on materials, energy, equipment, manpower, and time.